|
 Trombones
|
Conn
- USA is the leading manufacturer and distributor of band and
orchestral instruments for professional, amateur and student use.
The Company manufactures and distributes its products under a
variety of well-known brand names, including Vincent Bach brass,
Selmer USA woodwinds, C.G. Conn brass and King brass, |
| Alto Trombones |
|
 |
Conn 34H
Eb Alto Trombone
Symphony, key of Eb, 7" (178mm) bell,
.491/.500" (12.47/12.70mm) bore, brass outer slide, chrome-plated
inner slides, lacquered brass, 7C mouthpiece, deluxe woodshell
case. An alto trombone with slide positions in the same relative
positions as those of a tenor trombone. Full warranty. Optional
on this model is a bright silver plated finish.
| £ 1,039.00 |
 |
|
|
Conn 36H
Eb Alto Trombone w/Bb Attachment
Symphony, key of Eb, 7" (178mm) bell,
.491/.500" (12.47/12.70mm) bore, Bb rotor attachment, brass outer
slide, chrome-plated inner slides, lacquer finish, 7C mouthpiece,
deluxe woodshell case. An alto trombone with slide positions in
the same relative positions as those of a tenor trombone. The unique
Bb rotor offers added facility in difficult passages and makes possible
some trill passages. Full warranty. Optional on this model is a
bright silver plated finish.
| £
1260 |
|
|
Small Bore "Jazz"
Trombone |
 |
Conn 100H
Jazz
Tenor Trombone
Artist, .500"
(12.70mm) bore, 7-3/8" (187mm) yellow brass bell, 3 interchangeable
leadpipes, lightweight slide, lacquer finish, woodshell case. Ideal
for lead or solo performance. Full warranty. Options include silver
plating (model 100-SP) or a black nylon tenor trombone gig bag with
shoulder strap.
- standard yellow brass bell.
| £1,155.00 |
|
|
Medium-Large Bore
Tenor Trombone |
 |
Conn 52H
Medium-Large
Bore Tenor Trombone
Artist,
dual bore with F attachment, 8-5/8" (219mm) rose brass bell, .525"/.547"
(13.34/13.89mm) dual bore slide, lacquer finish, 6-1/2ALS small
shank mouthpiece, woodshell case. The 52H helps advancing players
make a smooth transition from a small bore to a larger symphonic
trombone. With a medium-large dual bore and a convenient finger
ring on the slide for smaller hands, the horn is a good match for
intermediate level players. The dual bore helps provide the larger
sound needed in concert band & orchestra, while allowing for an
acceptable "lead" sound in jazz ensembles. The 52H's use of a small
shank mouthpiece and its 525 primary bore helps give the player
greater flexibilty and a clearer (and easier) high range while requiring
less air than a large bore model. A straight 547 bore slide can
be added later to make this instrument a true symphony model.
| £945.00 |
|
|
Large Bore "Symphonic" Tenor Trombones |
 |
Conn 8H
Symphonic
Tenor Trombone
Symphony, .547"
(13.89mm) bore, 8-1/2" (216mm) rose brass bell, rose brass outer
slide, lacquer finish, 5G mouthpiece, deluxe woodshell case. Full
warranty. Options include a variety of handslides with removable
leadpipes; bright silver plated finish; and a black nylon tenor
trombone gig bag with shoulder strap. below to additional available
options.
- standard rose brass bell.
| £1,130.00 |
|
|
|
Conn 88H
Symphonic Tenor Trombone with traditional
F Attachment
Symphony, .547"
(13.89mm) bore, .562" (14.27mm) bore through F attachment, 8-1/2"
(216mm) rose brass bell, rose brass outer slide, lacquer finish,
5G mouthpiece, deluxe woodshell case. This famous tenor model delivers
superior response in all registers. Traditional F attachment is
compact and more resistant to damage than open wrap models. Made
in Ohio, this trombone is a close replica of the old Elkhart horns
of legend. To get even closer, choose the thinwall bell model listed
below. Full warranty. Options include a variety of handslides with
removable leadpipes; bright silver plated finish; and a black nylon
tenor trombone gig bag with shoulder strap.
Variations on this model include: - standard
rose brass bell.
88HT - with Elkhart style
thinwall bell (for better response).
NEW 88HTG
- with Elkhart style bell and Greenhoe Valve
88HY -
with yellow brass bell (for more projection).
88H-SGX -
with solid sterling silver bell and gold plated trim.
|
|
Conn 88HO
Symphonic Tenor Trombone with Open Wrap F
Attachment
Symphony, .547"
(13.89mm) bore, .562" (14.27mm) bore through open wrap F attachment,
8-1/2" (216mm) rose brass bell, rose brass outer slide, lacquer
finish, Conn 5G mouthpiece, deluxe woodshell case. This instrument
has won overwhelming acclaim for its evenness of sound, excellent
response, and flexibility of performance. Full warranty. Options
include a variety of handslides with removable leadpipes; bright
silver plated finish; and a black nylon tenor trombone gig bag with
shoulder strap.
Variations on this model include:
- 88HO
- with standard rose brass bell.
- 88HTO
- with Elkhart style thinwall bell (for better
response).
- 88HYO
- with yellow brass bell (for more projection).
- 88HO-SGX
- with solid sterling silver bell and gold plated trim.
- 88KO
- with large throated, 9" bell (for more power).
|
|
Conn 88HCL
Symphonic Tenor Trombone with Christian Lindberg
rotor
Symphony, .547" (13.89mm) bore with patented
CL2000 F rotor system, open wrap, .562" (14.27mm) bore through F
attachment, 8-1/2" (216mm) rose brass bell & outer slide, lacquer
finish, C.G. Conn mouthpiece, woodshell case. The CL2000 rotor system
provides 40% faster action & virtually eliminates any response difference
between the F attachment & straight trombone sides. Full warranty.
Options include a variety of handslides with removable leadpipes;
bright silver plated finish; and a black nylon tenor trombone gig
bag with shoulder strap.
Variations on this model include:
- 88HCL - with standard rose brass bell.
- 88HT-CL - with Elkhart style thinwall bell
(for better response).
- 88HK-CL - with large throated, 9" bell (for
more power).
- 88H-SGX-CL - with solid sterling silver bell
and gold plated trim.
|
Bass Trombones |
|
 |
Conn 62H
Bass Trombone with Dual Dependant Rotors
The "Bill Reichenbach" bass. Double
dependant rotor system, .562" (14.27mm) primary bore, .580" (14.73mm)
bore through rotor sections, 9" (229mm) annealed rose brass bell,
three interchangeable leadpipes, chrome-plated inner slides, lacquer
finish, 1-1/2G mouthpiece, deluxe woodshell case. Full warranty.
Options include bright silver plated finish; and a black nylon
gig bag with shoulder strap.
|
|
Conn 62Hi
Bass Trombone with Dual Independant Rotors
Double independant rotor system, .562"
(14.27mm) primary bore, .580" (14.73mm) bore through rotor sections,
9" (229mm) annealed rose brass bell, three interchangeable leadpipes,
chrome-plated inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe
woodshell case. Full warranty. Options include bright silver plated
finish; and a black nylon gig bag with shoulder strap.
|
|
NEW
Conn 62HCG
Bass Trombone with Dual
Independant Greenhoe Valves
Double
independant Greenhoe valve system, .562" (14.27mm) primary bore,
9" (229mm) annealed rose brass bell, three interchangeable leadpipes,
chrome-plated inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe
woodshell case. Full warranty. Optional bright silver plated finish.
|
|
Conn 62HCL
Bass Trombone with Dual Independant CL2000
Rotors
Double independant
CL2000 Lindberg valve system, .562" (14.27mm) primary bore, 9" (229mm)
annealed rose brass bell, three interchangeable leadpipes, chrome-plated
inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe woodshell
case. Full warranty. Optional bright silver plated finish.
|
|
Conn 110H
Bass Trombone with Open Wrap
Single
Rotor Bass, .562" (14.27mm) bore, 10" (254mm) rose brass bell, F
rotor, lightweight slide, chrome-plated inner slides, new linkage,
lacquer finish, 1-1/2G mouthpiece, deluxe woodshell case. An excellent
choice for the player who desires a basic single rotor instrument.
Full warranty. Options include bright silver plated finish; and
a black nylon gig bag with shoulder strap.
|
|
Conn 112H
Bass Trombone with Dual Rotors & Open Wrap
Double Rotor Bass, .562" (14.27mm) bore,
10" (254mm) rose brass bell, F rotor, lightweight slide, chrome-plated
inner slides, lacquer finish, 1-1/2G mouthpiece, deluxe woodshell
case. First rotor in F, second rotor in Gb; activating both rotors
enhances D in first position. An optional D slide permits low B
natural in first position when both triggers are engaged. Full warranty.
Options include bright silver plated finish; and a black nylon gig
bag with shoulder strap.
|
Slide
& Leadpipe Options for 8H & 88H models. |
|
Slides
(all include
three leadpipes, described below) |
SL2525
Medium
Bore (item 38234)
Medium bore
(0.525") slide normally found on medium bore Conn instruments such
as the 79H (no longer manufactured) or the Bach 36 series. Designed
to increase upper register focus and allow for a more compact feel
overall. Good choice for commercial or jazz work. Includes leadpipe
models X, T and H (details below).
|
|
SL2547
Medium Dual Bore (item 38235)
Medium-Large dual bore slide combines
a 0.525" upper tube with a 0.547" lower tube. Designed to increase
focus and clarity in the upper register when compared to a straight
547 bore slide. Good choice for the principal symphonic or concert
band player. Includes three leadpipes, modelx H, T and X (details
below).
|
|
SL4747
Large Bore (item 38236)
Standard Large bore (0.547") slide
traditionally found on the 88H series trombone. This enhanced
model features three removable leadpipes for increased versatility,
wheras the standard 547 slide has one fixed leadpipe. Leadpipe
models include S, R and M (details below).
|
|
SL4762
Large Dual Bore (item 38237)
Large
dual-bore slide combines a traditional large bore (0.547") upper
tube with a bass trombone bore (0.562") lower tube. This popular
model gives a more open feel, decreases focus somewhat, and reduces
"edge" in loud passages. Includes three leadpipes models S, R and
M (details below).
|
|
SL6262
Bass Bore (item 38238)
Bass
Trombone bore (0.562") slide designed to fit the 8H/88H series trombone.
While not converting the instrument to a true bass trombone, this
super large slide allows the 88H to better function as the low trombone
in early music (Mozart Requiem, etc), commercial and concert
band settings. Includes three leadpipes models B, C and D (details
below).
|
|
|
| Leadpipes |
Model B
Features
a standard large shank receiver with a longer venturi and slower
taper than normal. Designed to give traditional response characteristics
on the oversized SL4762 slide. |
|
Model C
Features
a standard large shank receiver with a shorter venturi and slower
taper than normal. Designed for added stability. For use with the
SL4762 slide. |
|
Model D
Features
a standard large shank receiver with a shorter venturi and faster
taper than normal. Designed for increased flexibility. For use with
the SL4762 slide. |
|
Model H
Features
a standard small shank receiver with a short venturi pipe for a
combination of flexibility and control. For use with SL2525 and
SL2547 slides. |
|
Model M
Features
a standard large shank receiver with a longer taper than normal.
Designed to decrease resistance. For use with SL4747 and SL4762
slides. |
|
Model R
Features
a Remington shank receiver with a standard venturi taper. Designed
to give traditional response when used with a Remington shank mouthpiece.
For use with SL4747 and SL4762 slides. |
|
Model S
Features
a standard large shank receiver with a standard venturi taper. Designed
to give traditional response characteristics. For use with SL4747
and SL4762 slides. |
|
Model T
Features
a standard small shank receiver with a long venturi for greater
control (i.e. "slotting"). For use with SL2525 and SL2547 slides.
|
|
Model X
Features
a large shank receiver with a straight taper designed for great
flexibility. For use with SL2525 and SL2547 slides. This hybrid
design allows you to use your existing large shank mouthpiece in
a medium bore slide that would normally only accept a small shank
mouthpiece. |
|
