| Wilkinson
Vibrato Systems |
WVC SERIES
Since its introduction in 1954, this classic
design is the most copied guitar vibrato bridge ever.
The design is so simple and eminently usable it is a challenge
to improve on it, but improve it we did! Faithfully reproducing
the size and weight of the original, this is a direct retro-fit
for the "real thing" but with the added benefit of
a push-in vibrato arm (rather than the troublesome original
screw-in type).
We also staggered the string holes in the sustain block allowing
the strings to follow the natural intonation line of the saddles,
keeping the strings' "angle of attack" over the saddles
intonation point more consistent, eliminating annoying string
"hang-up" giving unrivalled tuning stability. Completing
the assembly are the bent steel saddles built from the same
gauge steel as the originals to retain the "vintage sparkle"
that this bridge has become famous for.
WVC SB
All the features of the WVC with
the added benefit of a SOLID STEEL sustain block, a feature
never before available in a vibrato bridge at this price point.
|
WV2
Two pivot screws are considered by some to give
a better fulcrum action than the six screw "classic design".
If this is your choice then this is the "vintage" bridge
for you. This bridge is supplied with pivot posts that utilise
inserts to give them the structural stability needed when only
two fulcrum posts are used. Adjustable for height, this bridge
can be "Floated" above the guitar body for ultra smooth
vibrato effects. Push-in vibrato arm, vintage spec bent steel
saddles and "stagger drilled" block are all featured
on this model.
WV2 SB
Same specifications as the WV2 but with a
SOLID STEEL sustain block.
|
 WV6
Providing a bridge which offered the unsurpassed
"tone transfer" of a 6-screw pivot system but with the
smooth fulcrum action of a 2 pivot set-up was a challenge we could
not resist.
By utilising the unique Wilkinson "5+1" knife-edges it
is now possible. One hole to locate the vibrato laterally whilst
the remaining 5 elongated slots eliminate the chance of screws binding
in the holes, resulting in a "return to original position"
second to none! Push-in vibrato arm, vintage spec bent steel saddles,
and "stagger drilled" block are also included on this
model.
|
WVPC
A
modern twist on the classic design. Ultra smooth under a player's
hand, with a sleek, low-profile surround restricting the sideways
movement of the SOLID STAINLESS STEEL saddles, the ME range of vibratos
is the ultimate in comfort and performance. Ideally suited to more
contemporary guitar designs, this family of bridges looks far more
expensive than it is.
Features include a stamped steel "heat hardened" top plate
with 6-screw pivot mounting. Push-in arm and Wilkinson design "stagger-drilled"
block for unrivalled tuning stability. |
WVP2
Two pivot screws allow
this bridge to be "floated" above the guitar body for
ultra smooth vibrato effects. Push-in vibrato arm, solid stainless
steel saddles and "stagger drilled" block are all featured
on this model
|
 WVP6
A 6-screw vintage-style system but with the
smooth fulcrum action of a 2 pivot set-up. The unique Wilkinson
"5+1" knife-edge eliminates the chance of screws binding
in the holes, resulting in a "return to original position"
second to none! Push-in vibrato arm, stainless steel saddles,
and "stagger drilled" block make this an ideal upgrade
for your old vintage bridge.
|
WVP
The
exclusive "Wilkinson Wave" knife edge design gives this
sleek bridge the smoothest action of any fulcrum vibrato available
anywhere, at any price! Features include a stamped steel "heat
hardened" top plate. Solid stainless steel saddles. Push-in
arm and Wilkinson design stagger-drilled block for unrivalled tuning
stability.
A truly ultra modern look with classic values.
|
WVS
Solid steel CNC MACHINED top plate with
"Wilkinson Wave" knife edge, designed to retro-fit "American
Standard" spacing guitars. Featuring solid stainless steel
saddles, the WVS is the ultimate in 2 pivot fulcrum classic-styled
vibrato bridges.
Ideally suited to modern guitar designs, this bridge features a
tension-adjustable push-in vibrato arm and Wilkinson design stagger-drilled
STEEL BLOCK for unrivalled tone and tuning stability.
WVP SB
The only way to improve on the WVP is
to add a sustain block made from steel. This feature has never been
available before at a price as low as this. A real professional
piece of guitar hardware.
WVS6
Solid steel CNC MACHINED top plate with "Wilkinson
5+1" knife edge designed to retro-fit "American Vintage"
spacing guitars from 1954 onwards - with no modification whatsoever.
This unique knife delivers the best "return to zero" of
any vintage style 6-screw system.
Featuring SOLID STAINLESS STEEL saddles, the WVS6 vibrato offers
more benefits over conventional 6 screw bridges, including a push-in
tension-adjustable vibrato arm and Wilkinson design stagger-drilled
STEEL BLOCK for unrivalled tone and tuning stability |
WTB
This classic 3-saddle design has been
around for over 50 years and is still regarded as the ultimate "Tone
machine". Now with the staggered brass saddles, we have achieved
individual string intonation never before available in a design
of this type. The baseplate is a faithful reproduction of the original
and is steel - this is very important in a bridge of this style
due to the effect it has on the magnetic field of the pickup mounted
in it. .
|
WBBC
This bass guitar bridge is a perfect example
of the saying, "less is more". Authentic barrel-style
brass saddles mounted on the correct gauge bent steel baseplate
creates the perfect reproduction vintage bass bridge, as fitted
to the original instruments. Whether you are looking to replace
your existing bridge or creating a handmade instrument, this should
be your first choice for "classic tone". |
 GTB
SERIES
This style of "wrap-over" guitar bridge/tailpiece
combination has seen a resurgence of popularity in the last few
years.
Its appeal and sound quality lie in the simplicity of the original
design. However, individual string intonation left a little to
be desired. Now with the addition of a movable G and B saddle,
many different string gauges can be perfectly tuned to make your
guitar sound even better.
|
